Lost my keys
- Thread starter landover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
monkfish24
Well-Known Member
- Posts
- 1,296
- Location
- Cornwall
Ashamed to say my locks open with a screwdriver!
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Never actually tried locking mine!
I only have an ignition key and one for the petrol cap. Think there are door keys on the spare set.
monkfish24
Well-Known Member
- Posts
- 1,296
- Location
- Cornwall
I'm not sure door locks are a concern when you risk a 12 gauge up your ass!Never actually tried locking mine!
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Appearance of my vehicle is offputting to many, it seems!I'm not sure door locks are a concern when you risk a 12 gauge up your ass!
a screwdriver should get you in .... why bother with locked doors, most numpty average drivers wouldn't know how to start a series landy anyway. Can't remember where the lock number will be (near the ignition barrel?). Your average high street key cutting shop usually stock period ingition key blanks (70's & 80's models).
Ive got in with an old key from who knows what, probably a roof-rack. Fancy that.
Ordered a new ignition barrel with keys, £12
for door lock barrels, will the anti-burst ones fit the standard mechanisms ? They look alike but then so many bits do.
Sometimes I park the old dear away from my dog. Id like the option of locking it even if the determined tealeaf can have it away with a coke can
Ordered a new ignition barrel with keys, £12
for door lock barrels, will the anti-burst ones fit the standard mechanisms ? They look alike but then so many bits do.
Sometimes I park the old dear away from my dog. Id like the option of locking it even if the determined tealeaf can have it away with a coke can
RobertP
Active Member
- Posts
- 320
" will the anti-burst ones fit the standard mechanisms ? They look alike but then so many bits do."
I think the barrels are the same. Just be aware it is possible to insert the new barrel the wrong way up. It still works, but I did this and I have two doors where the key goes in smooth side up, and one the other way.
I think the barrels are the same. Just be aware it is possible to insert the new barrel the wrong way up. It still works, but I did this and I have two doors where the key goes in smooth side up, and one the other way.
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
there is a thread somewhere on fitting the anti bursts to a series, so it has been done, iirc there is a bit of effort
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
here it is, twas bump that did it
https://www.landyzone.co.uk/land-rover/how-to-fit-anti-burst-locks-easy-slightly-moderate.227043/
https://www.landyzone.co.uk/land-rover/how-to-fit-anti-burst-locks-easy-slightly-moderate.227043/
