1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Loss of power, misfire then stall

Discussion in 'TD5' started by AdamD1, Apr 27, 2019.

< Previous Thread | Next Thread >
  1. AdamD1

    AdamD1 Well-Known Member

    Joined:
    May 21, 2017
    Posts:
    489
    Likes Received:
    159
    Location:
    Essex
    Sadly have had a three day leaning trip in Wales reduced to one because of the above. When under a sustained load up a hill trying to maintain normal traffic speeds My D2 TD5 auto was beginning to lose power, then ‘misfire’ followed by a stall when you stopped. Turn the key again and all is good until the next hill. Managed to nurse it home on A&B roads, 250 miles in about 8 hours! Over the last few months it has taken a couple of attempts to start on two or three occasions. Could it be linked?

    Fault codes are open circuits on all injectors, ecu plugs appear to be squeaky clean on the inside. I have new injector seals and a loom to fit and have read about a potential place the loom can rub on ace pipes, any other pointers gratefully received!!
     
  2. tom1979

    tom1979 Well-Known Member

    Joined:
    Aug 22, 2013
    Posts:
    1,476
    Likes Received:
    258
    Location:
    Bedford
    Have you tried a new Injector loom?

    Edit: try your Injector loom, 10 minute job
     
< Previous Thread | Next Thread >