Location of reverse switch?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Cookee

Member
Posts
53
I have got everything working except the reversing light - I have looked through all of the information I can find and can't locate the gearbox switch for the reversing light?

Anyone got any idea please? It's a 1992 Classic auto with a 3.9 V8 :)

Thanks!
 
I have got everything working except the reversing light - I have looked through all of the information I can find and can't locate the gearbox switch for the reversing light?

Anyone got any idea please? It's a 1992 Classic auto with a 3.9 V8 :)

Thanks!

The reverse light/inhibitor switch located on the gearbox...

You can reach it from underneath and do it by 'feel', be careful not to knock too much dirt in to the g/box...
 
Reverse light switch is an integral part of start inhibitor​
switch. It is located on left hand side of gearbox,​
accessible from beneath vehicle.​
1.​
Place vehicle on suitable ramp.

2.​
Disconnect battery negative lead.

3.​
Disconnect multi-plug.

4.​
Release clamp bolt, remove clamp.

5.​
Remove switch.

Refit

6.​
Fit a new ’O’ ring to switch.

7. Reverse removal procedure

http://www.landroverresource.com/docs/rangerover/Range_Rover_Classic_Manual_1995.pdf

page 733, J5970

rrc733.png



 
Back
Top