P38A Location of Glovebox Strut

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

awkwardbob

Well-Known Member
Posts
590
Location
Glasgow
Hi,

min no what is likely the latest in a series of daft questions, could anyone explain where I might expect to find the Glovebox strut ?

If there is one in our P38, then it certainly doesn’t work, the box flops open unceremoniously.

I thought I’d have a poke around to check the state of the strut and I can’t even find the blinking thing.

From what I’ve read it sounds like the retaining bracket is a common failure so I wonder if it’s just been completely removed.

Would be very grateful for any enlightenment !

Thanks

Bob
 
There is a strut in behind pics below

The glovebox shouldn't just fly open it should gradually drop, mine used to drop and hit te floor, due to the brass inserts breaking free from the glove box

You can just about see it in these pics..
nV9QbSQl.jpg

3rsdJwxl.jpg


It is secured to the back of the glove box with 2 screws, 2 brass inserts sit in the plastic below

I drilled straight through the box and used a torx bolt to hold it, I had to tap it too!

fL64B4el.jpg


C3fJjZql.jpg


Fixed!
rHL247il.jpg



The centre console lit should also spring up when you press the button ;)
 
There is a strut in behind pics below

The glovebox shouldn't just fly open it should gradually drop, mine used to drop and hit te floor, due to the brass inserts breaking free from the glove box

You can just about see it in these pics..
nV9QbSQl.jpg

3rsdJwxl.jpg


It is secured to the back of the glove box with 2 screws, 2 brass inserts sit in the plastic below

I drilled straight through the box and used a torx bolt to hold it, I had to tap it too!

fL64B4el.jpg


C3fJjZql.jpg


Fixed!
rHL247il.jpg



The centre console lit should also spring up when you press the button ;)


Thank you so much, that’s really helpful.

I’ll have a look tomorrow, mine lacks any grace. Oh and the centre console is floppy too so that’s on the list as well !
 
Oh, one thing, how did you get the box so far open in the second pic ?

mine doesn’t open that far... I have had deeper access but only by removing the three screws above
 
Oh, one thing, how did you get the box so far open in the second pic ?

mine doesn’t open that far... I have had deeper access but only by removing the three screws above
It was broken thats why it opened so far ;)

You have to take the plastic support structure off to remove the strut off the box, if yours isn't broken like mine ;)

A few screws

0cPqvgdl.jpg
 
Didn't I read somewhere always check opener button works before screwing back in place or there could be problems.
 
Just been out and checked for the strut yes its there, no it dont work any more, no strut on the early models cubby box unless its fitted to the flip over drinks ones.
 
:D:D:D:D
Trust you!

Enery is right. The brass inserts you need to concern yourself with they are a PITA. Other thing to watch is what I did. Forgot to preload the open-button mechanism before putting it together so effectively superlocked myself out of the glove box. Only option was to break in which causes slight damage however careful you are.
 
Back
Top