danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
lights
- Thread starter danny6801
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
what plugs on yours then?my defender bolted strait on though be warned i have had a few issues with the bulb holders the stop /tail kept melting and the indicator bulb keeps coming loose
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Just cables coming straight out the back of the lights. I will try some female crimps see how they go.
Is yours a 200tdi or older? They have the old lucas bullet connectors, not plugs like later ones.
I imagine you can buy a loom end that connects to the Landys loom with the correct plug for the lights.
Or send em back for the correct earlier type.
And if your bulb holders are ok why not just buy clear lenses and fit coloured bulbs. Much cheaper and simpler!
I imagine you can buy a loom end that connects to the Landys loom with the correct plug for the lights.
Or send em back for the correct earlier type.
And if your bulb holders are ok why not just buy clear lenses and fit coloured bulbs. Much cheaper and simpler!
Southernlandy
Active Member
- Posts
- 523
- Location
- Hampshire
I had the same problem with mine which were lucas, ended up buying different ones on ebay for £2.95 each and they work perfectly.
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Mine is earlier than a 200 tdi I think I will just make them fit more fun in making them work.
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
try here,got new plugs after one of mine melted Land Rover / Rover Connectors | Automotive Connectors | Switch on to Simtek(UK)...for motorsport electrical and electronic supplies...design solutions. | Simtek (UK) Ltd
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Thanks for that engineer that's very helpful.
kes86
Active Member
- Posts
- 775
- Location
- Isle of Man
If you struggle to find any, boltonbits have them on their EBay shop.
Philcard
Member
- Posts
- 41
- Location
- Isle of Wight
Paddocks sell an extension loom to existing lights which has a plug at one end and bullet fittings at the other - I needed to replace one on mine and simply cut off the bullets and connected in with a connector.
