Disco 1 Light guards, no instructions on how to fit

Just got some heavy duty light guards on eBay. Totally mint but minus fitting instructions has any one got a link to them? All I can find is d2d3 d4 do they forget there are d1 owners. Can anyone help me

How do you upload a photo aghhhhh

Press "upload a file" button, then the "choose file" button, double click file from cloud/storage/gallery and then press the "full size" button so we don't get a little thumbnail to press this side of the screen

Thanks for the heads up on how to post pics
Really appreciate it
Dave

The front ones it think are obvious, the u clamp with the hollow post clamps to the front bumper, and the end of the guard is placed into it, with the top fixing bracket in place on the top of the guard and touching the slam panel drill two screw holes and fix the bracket with stainless screws & washers to suit.
You will need the small rubber buffers that fit in the holes on the side of the outer edge of the guard, best of luck finding them now, there should be four per guard but I’m only left with the two punters which protect the wing from damage.
They are similar the bit of rubber that the fuel flap closes against.

The rear ones there is “no hope” unless you also have the fixings required, as shown in the photo of one of my spares.
Pictures below may help, instructions are in the the Fitting Accessories manual and use to be on the LR Topx site but that appears not to be available now.

Cheers Discool, I'm in the process of trying to locate a supplier who will just sell the rear mounts, if no joy I will no doubt fabricate some out of my junk pile lol.
But big thanks again
Dave