Left hooker series 3

anyone else here got an LHD ser 3? I’m asking as I’m needing to grease the clutch pedal assembly within the pedal box and it’s on the left hand side, I,e on front of the driver on the LHD model....looks like the brake servo and all that will have to come,out first to get to the pedal box....any advice appreciated ....

Having once helped a mate coverted a series from RHD to LHD [ import tax reasons ] the clutch unit does end up under the wing top.I would squirt penetrating oil up from underneath at the pivot point and see if that sorts it first.
Have driven LHD cars and it was fine but driving said series landy was just weird.

Yes, I’ve scooshed a load of oil up the pedal, does free it off to be fair although it’s still not returning fully....need to get in it from the top I think

Has the return spring been removed?
This is inside the footwell attached to the pedal & fixing bolts

Yes I’ve taken it off...looks,likes it the original one! Back in now, no difference

Sounds like you will have to bite the bullet and take off what you have to to get at it.

Scooshed as much liquid grease up the pedal as I could...took it off road in the forest for a bit and it loosened right off, back to normal. Might be saved for a bit...can’t dismantle the brake servo etc coz don’t have a garage or shelter and at the moment it’s pisching down here and blowing a gale...as usual

Hope it stays sorted for a bit. Weather much the same on the west Wales coast,staying inside as much as possible but just had a soaking feeding the cow's.

Aye, it’s going fine now but I’ll need to get it,properly greased soon. Going to the garage next week to see about a heater...will get it done then. Not a chance of me getting it done it’s freezing, literally, here now....