hi
wished to share my findings in the hope it may be usual to others
had a slow drop on the NSF strut after pulling fuse F26 and leaving overnight
but couldn’t find the leak as i only bubble tested the top of the strut and not around the middle , on removing it and pumping it up it didn’t start leaking until the rubber bladder got level with the metal surround @ 3 bar or 40 Psi
which taking a guess it would need to be in off road height in order for the bladder to protrude from the metal strut casing
u can see from the picture it’s leaking closest to the outside of the metal casing and not the inside
hope everyone hasn’t nodded off and fingers crossed will help someone in the future
wished to share my findings in the hope it may be usual to others
had a slow drop on the NSF strut after pulling fuse F26 and leaving overnight
but couldn’t find the leak as i only bubble tested the top of the strut and not around the middle , on removing it and pumping it up it didn’t start leaking until the rubber bladder got level with the metal surround @ 3 bar or 40 Psi
which taking a guess it would need to be in off road height in order for the bladder to protrude from the metal strut casing
u can see from the picture it’s leaking closest to the outside of the metal casing and not the inside
hope everyone hasn’t nodded off and fingers crossed will help someone in the future