Leaking coolant - P Gasket - water pump

Mo younesi said:

With many thanks to all the folks who took time and replied and shared their experiance, to finish off this thread on a good note, while I had the aluminium housing and the pullies out of the engine, I had a go to clean it up but nothing could make shining like new, so decided to paint them with some metallic colour so whenever I look inside the bunnet it would be pleasing. Cheers View attachment 145212 View attachment 145212 View attachment 145213

Click to expand...

neilly said:

One little thing to check, if you have not already.

The coolant pipe that sits above the water pump pulley and is held in place with that silly little bracket that LR fitted. Make sure it is not rubbing on the water pump pulley, It is amazing how many you see that have a cut out where they have worn on the pulley at some time.

So how did you do the fan in the end?

Cheers

Click to expand...