[email protected]
Member
- Posts
- 21
Someone must have come across this problem with front body height higher on the passenger side, the springs are the correct type and fitted on the correct side.the passenger side is 33" high fro
Series 3 leaf springs
- Thread starter [email protected]
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,148
- Location
- Gloucestercotshirewolds
You might want to finish the post but it's a common issue.
The first thing to do is slacken the U bolts slightly and then bounce the whole thing up and down as much as possible and then retighten.
Some people try to correct lean by lifting the body one side and then tightening Ubolts with limited success.
The first thing to do is slacken the U bolts slightly and then bounce the whole thing up and down as much as possible and then retighten.
Some people try to correct lean by lifting the body one side and then tightening Ubolts with limited success.
springs are handed so the driver side should be just a bit higher when empty. Is the distance between chassis mountings the same? Are the paribolics if so then welcom to the club most of us have that problem after 6 months. you could swap them over if it continues. where did they come from? did they lable them correctly? I seem to have that problem with 50% of what I bye
