Landy Wolf

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

Mr Darcy

New Member
Posts
4
Location
Macclesfield, Cheshire
Hi I got myself a Landy Wolf 300 tdi a few months ago and need some advice.

The question I have is regarding the heating system or lack of it! In the engine bay there is a small metal box that is badly corroded that has cables with power entering it and there are cables leaving it without power which go to the motor fan. Is that metal box simply an EMC filter and if it were bypassed would the motor blower unit work normally? I think the EMC filter may have been fitted to stop interference with the bowman radio which has been removed.
 
Thats too much work @Stanleysteamer
I was thinking more along the lines of :)
41qmhiHx1NL._SY445_QL70_.jpg


J
 
marjon said:
Welcome:).

Put on more clothes even when it works it could be best described as tepid:).

Best really to ask in here with a pic of said box may help Defender 90 / 110 / 130 | LandyZone - Land Rover Forum

We usually prefer just to look and pics in this section:D.

J
Click to expand...
Hi I've loaded up a piccy of the corroded part at first I thought it might have been a 24 v to 12 v dropper but now I'm more inclined to think its is an EMC Filter given the military bowman radio that would have been on the vehicle. The top two lines give the part number for Cogema and the customer part number. I've searched the Cogema part no online without success. The bottom two lines state it is a rated Voltage 24V and rated Current 2x 10A
Thanks
 

Attachments

  • converter.jpg
    converter.jpg
    157.5 KB · Views: 67
Mr Darcy said:
Hi I got myself a Landy Wolf 300 tdi a few months ago and need some advice.

The question I have is regarding the heating system or lack of it! In the engine bay there is a small metal box that is badly corroded that has cables with power entering it and there are cables leaving it without power which go to the motor fan. Is that metal box simply an EMC filter and if it were bypassed would the motor blower unit work normally? I think the EMC filter may have been fitted to stop interference with the bowman radio which has been removed.
Click to expand...
I thought it might have been a 24 V to 12 V dropper to begin with but I'm more inclined to think it is an ECM filter now. It gives the part nos on the label which I cannot source online, then it states it is rated 24 V DC and 2x10A current.
 

Attachments

  • converter.jpg
    converter.jpg
    157.5 KB · Views: 67
Hi and welcome!

There are quite a few articles online and on here about improving heaters in landies, including fitting new larger heater matrix’ which should help.
 
You must log in or register to reply here.

Similar threads

Jazydave
Blower fans
Replies
12
Views
457
Datatek
Datatek
Wilson90
Wolf Door Top parts
Replies
6
Views
469
dag019
dag019
Sol
Reluctant swap? Wolf Defender 110 for 90
Replies
6
Views
341
Knappster
Knappster
P
Returning Zoner , asking about early Freelander filters.
Replies
3
Views
603
brianp38dse
brianp38dse
MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
2K
miktdish
miktdish
Back
Top