shadowster
Well-Known Member
- Posts
- 1,376
- Location
- 55'38.4n.4'49.1w
can you just hit the hinge pins out to take the door off, one of my doors need welding
landy door removal
- Thread starter shadowster
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomania
Well-Known Member
- Posts
- 6,947
I would just take the bolts out from the door. They are easy to line up again, I would leave the bulkhead bolts well alone (they may be well and truly stuck in and removing them will open a can of worms). I have done it this way several times now and it's never been a problem.
The pins don't come out so easily and you will risk damaging the door pillars etc.
The pins don't come out so easily and you will risk damaging the door pillars etc.
MrJC
Well-Known Member
- Posts
- 1,241
I had both my doors off in the summer... need to take one off next week to replace a mirror.
I followed Busters guide.... http://www.landyzone.co.uk/lz/f41/front-door-removal-75931.html
If the door has not been off before I would get new screws/bolts just in case. If the hinges are ok then I would not replace.
As Dicomania says.... dont touch the pillar screws!
I followed Busters guide.... http://www.landyzone.co.uk/lz/f41/front-door-removal-75931.html
If the door has not been off before I would get new screws/bolts just in case. If the hinges are ok then I would not replace.
As Dicomania says.... dont touch the pillar screws!
Last edited:
shadowster
Well-Known Member
- Posts
- 1,376
- Location
- 55'38.4n.4'49.1w
aye cheers thats what i'll do
