Landry 90 tub cappings

crofter65 · Jun 22, 2017

Hi, I am in the throws of giving my 90 a respray and some new doors and another rear tub, when I was prepinig the new (to me) tub I found foam strips where the cappings sit, is this a Land Rover fitting or has someone done this to separate the two metals.

mojo247 · Jun 22, 2017

is it item 11 on this pic you're referring to? if yes, then yes!

crofter65 · Jun 22, 2017

Hi that's not the bit, the foam was between the capping and the actual bulkhead the strips were only maybe 12mm wide and not very thick maybe 3-5mm, thanks.

neilly · Jun 22, 2017

You may find it is STC3290 ??????................ but I cannot get a good description of it.

Mine had foam there when I took it apart,

Cheers

neilly · Jun 22, 2017

Alternatively, there are a few choices in this thread.

https://forums.lr4x4.com/topic/39721-replacement-of-sealing-strip-between-body-and-hard-top/

Cheers

crofter65 · Jun 22, 2017

Thanks all I think I will just go with some foam tape of e bay and just use a smeer of black silicone on the original rubbers on the sides of the hard top.

Landry 90 tub cappings

crofter65

Member

mojo247

Active Member

crofter65

Member

neilly

Well-Known Member

neilly

Well-Known Member

crofter65

Member

Similar threads