land rover chassis ?

A

alan

Guest

• Aug 27, 2004

• #1

Has anyone got any proper scaled drawing for S111 swb chassis out there as i
would like to build my own .Why pay over the odds when you can buy the
materials and get it galv for less.Just sick and tried of being ripped off
for keeping the best of British on the road .Best regards Alan

 

R

R L Driver

Guest

• Aug 27, 2004

• #2

"alan" <[email protected]> wrote in message
news:[email protected]...
> Has anyone got any proper scaled drawing for S111 swb chassis out there as
i
> would like to build my own .Why pay over the odds when you can buy the
> materials and get it galv for less.Just sick and tried of being ripped off
> for keeping the best of British on the road .Best regards Alan
>
> It hardly seems worth bothering with drawings , you'll knock one up in a
couple of hours.
Steve the grease

 

T

Tom Woods

Guest

• Aug 27, 2004

• #3

On Fri, 27 Aug 2004 19:04:35 GMT, "R L Driver"
<[email protected]> wrote:

>
>"alan" <[email protected]> wrote in message
>news:[email protected]...
>> Has anyone got any proper scaled drawing for S111 swb chassis out there as
>i
>> would like to build my own .Why pay over the odds when you can buy the
>> materials and get it galv for less.Just sick and tried of being ripped off
>> for keeping the best of British on the road .Best regards Alan
>>
>> It hardly seems worth bothering with drawings , you'll knock one up in a
>couple of hours.
>Steve the grease

I think that there is a diagram with measurements on in the back of
the haynes book

 

R

R L Driver

Guest

• Aug 27, 2004

• #4

"alan" <[email protected]> wrote in message
news:[email protected]...
> Has anyone got any proper scaled drawing for S111 swb chassis out there as
i
> would like to build my own .Why pay over the odds when you can buy the
> materials and get it galv for less.Just sick and tried of being ripped off
> for keeping the best of British on the road .Best regards Alan
>
> It hardly seems worth bothering with drawings , you'll knock one up in a
couple of hours.
Steve the grease

 

T

Tom Woods

Guest

• Aug 27, 2004

• #5

On Fri, 27 Aug 2004 19:04:35 GMT, "R L Driver"
<[email protected]> wrote:

>
>"alan" <[email protected]> wrote in message
>news:[email protected]...
>> Has anyone got any proper scaled drawing for S111 swb chassis out there as
>i
>> would like to build my own .Why pay over the odds when you can buy the
>> materials and get it galv for less.Just sick and tried of being ripped off
>> for keeping the best of British on the road .Best regards Alan
>>
>> It hardly seems worth bothering with drawings , you'll knock one up in a
>couple of hours.
>Steve the grease

I think that there is a diagram with measurements on in the back of
the haynes book

 

R

R L Driver

Guest

• Aug 27, 2004

• #6

"alan" <[email protected]> wrote in message
news:[email protected]...
> Has anyone got any proper scaled drawing for S111 swb chassis out there as
i
> would like to build my own .Why pay over the odds when you can buy the
> materials and get it galv for less.Just sick and tried of being ripped off
> for keeping the best of British on the road .Best regards Alan
>
> It hardly seems worth bothering with drawings , you'll knock one up in a
couple of hours.
Steve the grease

 

T

Tom Woods

Guest

• Aug 27, 2004

• #7

On Fri, 27 Aug 2004 19:04:35 GMT, "R L Driver"
<[email protected]> wrote:

>
>"alan" <[email protected]> wrote in message
>news:[email protected]...
>> Has anyone got any proper scaled drawing for S111 swb chassis out there as
>i
>> would like to build my own .Why pay over the odds when you can buy the
>> materials and get it galv for less.Just sick and tried of being ripped off
>> for keeping the best of British on the road .Best regards Alan
>>
>> It hardly seems worth bothering with drawings , you'll knock one up in a
>couple of hours.
>Steve the grease

I think that there is a diagram with measurements on in the back of
the haynes book