Land rover 90 new engine

Hi all, just got my first land rover and unfortunatly the head gasket wasnt fitted correctly and its done a fair amount of damage to the engine. I was intending to change the engine, which is currently the 2.5 19j engine, but having it go on me just means i have to do it sooner than i intended. Now i've heard that the 200TDi conversion is the simpler one to do. But i was just wondering if anyone could tell me what needs to be done for a 300 conversion. I've heard its alot more work concerning engine mounts, but everyone keeps saying chuck in a 200 because its easier. But i'd like to weigh up both options before i go for a decision. Also if i decide to do the 300TDi conversion how much would it roughly cost for a garage to do it?

Cheers
Aussie243

all your monies plus an arm and half a leg..............

there's virtual reams of stuff on ere to read about doing what you want to do - search and ye shall find

looking at a grand +to have a engine supplied and fitted properly, someone will say they'll do it for a fiver sooner or later thou

search for 200tdi conversion on this forum... that search button is your friend, believe me and check out this dudes site for a mine of info...

200TDi conversions for 90/110/130 - by Glencoyne Engineering

I'll do it for a fiver


.







flywheel bolt tightening not guarenteed

good offer, but always read the small print

Cheers for the fast responses guys and cheers fleck i'll read up on that link you've posted.