Lack of power!!!

Hi all,

I have a defender 90 TD5 (2000) and have a bit of a snag. Whenever I get to the biting point with the clutch/accelerator I lose all power - no revs, nothing! If I switch the engine off and on again I can rev the engine no problem but as soon as I get to the biting point again the power dies and I can't rev the engine at all. I've read a few threads on this but I'm non the wiser. I've removed the clutch swith on the master cylinder but when I do this I can't rev the engine at all. I've replaced the injector loom and cleaned out the connections to the ECU. Any help would be much appreciated! Thanks.

Welcome.

Can’t really help with your issue, I know your handbrake is off

But you really need to ask tech type question in here.

https://www.landyzone.co.uk/forum/defender-90-110-130.7/

And somebody will be along to help. Sure it’s something simple.

This is a sort of shows us what you got (vehicle) and abit about ya.

Good luck.

J

marjon said:

Welcome.

Can’t really help with your issue, I know your handbrake is off

But you really need to ask tech type question in here.

https://www.landyzone.co.uk/forum/defender-90-110-130.7/

And somebody will be along to help. Sure it’s something simple.

This is a sort of shows us what you got (vehicle) and abit about ya.

Good luck.

J

Click to expand...

Thanks,
I've posted it on the link above. I'll the hang of this eventually!!!

While your waiting see if you can get the hang of a pic

It almost as good as ......... well you know what I mean (middle green button down there vvvvv).

Don’t worry we all have to learn to get around.

J

Welcome to the forum