L.E.D. Flasher Unit ?

cornish rattler · Oct 17, 2016

Hi guys
Can a faulty LED flasher unit cause the fuel, temp gauge and indicators to fail, the other day I was out driving on a M'way and noticed that all my small gauges and indicators had stopped working think after using the indicators to overtake something but only noticed this when I came off at the next junction, the reason I am thinking this is when we fitted the L.E.D. light kit last year the relay that was in the kit was faulty and caused similar problems, all fuses checked any idea's

zeaphod · Oct 17, 2016

Seems a bit unlikely, but you can never say for sure with a Land Rover. More likely your earth or power supply has failed behind the dash.

zeaphod · Oct 17, 2016

Just had a look at the diagram - well the diagram for mine anyway. There's a direct feed from the fuse to the instruments. Check both sides of the fuse with the ignition on - wiggle the fuse etc in case it's corroded. You can check the indicator flasher unit by using the hazard switch.

cornish rattler · Oct 17, 2016

Ok cheer's guys its hammering it down here now so will try and have a look in the week if not it will be weekend

cornish rattler · Oct 17, 2016

Not saying it is the flasher unit but I have ordered one just incase

cornish rattler · Oct 24, 2016

Sorted now I thought it was, replaced the L.E.D. flasher unit and everything is working again, the only down side is it was advertised as a Wipac one and when it arrived it was a Britpart one but tbh I always thought that Wipac and Britpart are the same company when it comes to electrical stuff

L.E.D. Flasher Unit ?

cornish rattler

Well-Known Member

zeaphod

Well-Known Member

zeaphod

Well-Known Member

cornish rattler

Well-Known Member

cornish rattler

Well-Known Member

cornish rattler

Well-Known Member

Similar threads