EntropyUK
Well-Known Member
- Posts
- 467
- Location
- Hemel Hempsted
The ignition barrel is not returning/ popping out when I remove the key from the ignition. Whats the best way to lubricate this part of the lock action is it WD40 or graphite powder?
P38A Key still in ignition
- Thread starter EntropyUK
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
It certainly isn't WD40. Spray some contact cleaner in, blow out with an air line. Do that a couple of times then apply graphite lock lube and work the key in and out.
cornishboater
Well-Known Member
- Posts
- 686
- Location
- Poole, Dorset
Mine use to do the same a few years back, wammers and Keith put me on the right path back then (along with a multitude of other things!)
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
What Wammers said +1
- Posts
- 4,841
- Location
- Rotherham
Agree with this one ,Had same problem followed wammers advice problem solved
RovyCouple
Active Member
- Posts
- 108
- Location
- Eymoutiers, Nouvelle Aquitaine
My red rovy barrel sticking, if left accidently in without pushing the barrel to release it , it drains the battery over night. Will follow Keith's advice
once again, great advisor.
once again, great advisor.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Similar threads
