Just called up for a quote on galvanising a bulkhead...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
£75 inc VAT is about right if it includes burning (acid-dip).

Had mine done at my local place (40-miles away up the A1) and they were very good. No warping (see the box-section bolted to the bottom mounts) and yes, I removed the mesh first (cut the welds and then bonded it back in afterwards.
There was some slight rippling to flat panels but nothing that shows when assembled.

 
@XRIZLAX I think you're about to get a bit busier!!
What sort of price (and method) for a repaired disco 1 chassis?

You should think about setting up some sort of group deal for LZ - I'm sure it would get people motivated to get their projects underway... It certainly does for me just to know that there's someone running a galv plant who knows about landies and would care a bit more than the average dippers - discount or otherwise.
 
Saltlick said:
@XRIZLAX I think you're about to get a bit busier!!
What sort of price (and method) for a repaired disco 1 chassis?

You should think about setting up some sort of group deal for LZ - I'm sure it would get people motivated to get their projects underway... It certainly does for me just to know that there's someone running a galv plant who knows about landies and would care a bit more than the average dippers - discount or otherwise.
Click to expand...
Ditto.
 
Im thinking that xrizlax might have mentioned this before, if he wanted the trade.... ?

Otherwise, its kind of like having a load of gold under your bed, and thinking noone else would want any! : )
 
He apparently did, but it went unnoticed or something? Or maybe he didn't want to push his business openly on the forum to avoid offence..
It's a bit of a drive for me, but does make me want to get a few LR things sorted!
 
I do cnc work. Its one of those things where i assume ive mentioned it, but i dont push the idea - possibly if i did, id get a load of people asking me to make trim stuff.

This kind of stuff -

teletronix.jpg



When i re-make my 101s dashboard, im going to engrave and mill an overlay for the existing dash, with more sensible controls.

Not as landrover specific as galvanizing though!

(i did make these keyrings though - )

keyrings.jpg
 
julianf said:
I do cnc work. Its one of those things where i assume ive mentioned it, but i dont push the idea - possibly if i did, id get a load of people asking me to make trim stuff.

This kind of stuff -

teletronix.jpg



When i re-make my 101s dashboard, im going to engrave and mill an overlay for the existing dash, with more sensible controls.

Not as landrover specific as galvanizing though!

(i did make these keyrings though - )

keyrings.jpg
Click to expand...

Nice stuff.
 
You must log in or register to reply here.

Similar threads

dag019
I have bought a station wagon
2
Replies
23
Views
2K
bluehaze
bluehaze
Landyjd
300Tdi Bulkhead Galvanising
Replies
7
Views
800
Landyjd
Landyjd
Karlos the jackal
just for a laugh
Replies
4
Views
722
Mark Piercy
Mark Piercy
andreas84
Looking for almost a "plug & play" conversion of the 2.5L petrol
Replies
1
Views
874
Wildefalcon
W
mick the builder
Galvanised bulkhead anybody
Replies
0
Views
705
mick the builder
mick the builder
Back
Top