Disco 2 Is this an xyz issue?

danam1 · Aug 5, 2015

Truck was driving fine then all of a sudden I got flashing M and S lights and she is now stuck in 3rd gear. I'm assuming it's a fault with the xyz switch?
It's a 52 plate auto.
Thanks in advance

sierrafery · Aug 5, 2015

can be 15 things, the XYZ switch or it's wiring is one of the most common but to be certain you'll have to plug in a dedicated tester and read the fault code stored in the transmission ECU

danam1 · Aug 5, 2015

Thanks sierrafery

danam1 · Aug 6, 2015

I left it 12 hours and it had cleared itself so I took it home (25 miles) and it went back into limp mode again!

gemsdad · Aug 6, 2015

danam1 said:
I left it 12 hours and it had cleared itself so I took it home (25 miles) and it went back into limp mode again!

As said earlier,unless you get the codes read,you will never know what is causing the problem,good luck.

Disco 2 Is this an xyz issue?

danam1

Active Member

sierrafery

Well-Known Member

danam1

Active Member

danam1

Active Member

gemsdad

NOT BOTHERED.

Similar threads