Is my pump chipped? 300tdi
- Thread starter landowner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
Like to know before I bash it off the pump
Why the violence?
Cause my eyes arn't what they were and I cant see any other way of gettin it off
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
If there is a wire on no4 injector your pump is a fly by wire EDC and i wouldn't bash anything off if you want it to work
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,459
- Location
- Gloucestercotshirewolds
Edc
If there is a wire on no4 injector your pump is a fly by wire EDC and i wouldn't bash anything off if you want it to work
No fancy electricery controling the fuel injection system, its mechanical.
The stop contol is hidden and there are three wires instead of one so I thought it was maybe like my old pug 106 with a chip thingy near the stop contol
What would edc be meaning then please
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
search for - 3 wire injection pump
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
EDC = Electronic Diesel Control
Not that then cause aint got an ECU except the EGR one which is disconnectedEDC = Electronic Diesel Control
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
You still haven't said why you want to remove it.
Sorry........
My engine wont start and I have eliminated everything else so next I want to check the stop control set up
EeEk
Well-Known Member
- Posts
- 683
- Location
- Elgin, Scotland
if its on the back, covering where you think the stop solonid should be then is for the alarm/immobilizer. It has 3 wires going in to it...all black I think.
Aye hack it off or until you get to the shear bolt heads that hold it on, then tap them round with your tool of choice..chisel/screw driver/vise grips.
one of the wires going to the eletronic bit is ignition live...use it to work the stop soloniod
Aye hack it off
or until you get to the shear bolt heads that hold it on, then tap them round with your tool of choice..chisel/screw driver/vise grips. one of the wires going to the eletronic bit is ignition live...use it to work the stop soloniod
if its on the back, covering where you think the stop solonid should be then is for the alarm/immobilizer. It has 3 wires going in to it...all black I think.
Aye hack it off
one of the wires going to the eletronic bit is ignition live...use it to work the stop soloniod
Thanks mate,
I got the shear bolts out of my pug pump by dremeling a slot in what was left of them and using an impact driver, came out easy.
I'll have a go tomorrow
