Jonmlb748
Well-Known Member
- Posts
- 122
- Location
- Calvia,Mallorca
Ip leak From here, any ideas ?
- Thread starter Jonmlb748
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie
Well-Known Member
- Posts
- 11,052
- Location
- Shropshire
There's a large O ring under the pumps distributer head.
On the join about an inch to the right of the bolt you have circled.
I believe it's possible to do in situ if you are careful and do not remove all the bolts at the same time that hold the distributer head on.
I would clean it up spotless first though just incase it's leaking somewhere else and just ending up where you're circled.
On the join about an inch to the right of the bolt you have circled.
I believe it's possible to do in situ if you are careful and do not remove all the bolts at the same time that hold the distributer head on.
I would clean it up spotless first though just incase it's leaking somewhere else and just ending up where you're circled.
Jonmlb748
Well-Known Member
- Posts
- 122
- Location
- Calvia,Mallorca
Thanks that would seem to be it.
Have a look here https://www.headseal.com/
Think I have also seen a youtube video for the same job.
Think I have also seen a youtube video for the same job.
Jonmlb748
Well-Known Member
- Posts
- 122
- Location
- Calvia,Mallorca
I think I will change the pump as I have a spare, only problem is I don’t have the pump locking tool but have made this ,any constructive criticism why it will or won’t work?
Flossie
Well-Known Member
- Posts
- 11,052
- Location
- Shropshire
Made what?
