Installed a Raptor Dash

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DreXeL

DreXeL

New Member
Posts
206
Got a Raptor Dash from the missus for my birthday, lovely bit of kit.

Before:

Dash1_zpsd4627298.jpg


After:

Dash3_zps39adf15a.jpg


Dash2_zpsb747a16e.jpg


Still need to tidy up some wiring, and it has highlighted how the rest of my dash has seen better days, but I'm really happy with it :)
 
I've got one too. Really nice bit of kit. If you've got fuel gauge in centre dash what have you got in the normal dash? Is that water temp in centre dash too?
 
cowasaki said:
I've got one too. Really nice bit of kit. If you've got fuel gauge in centre dash what have you got in the normal dash? Is that water temp in centre dash too?
Click to expand...

I have a rev counter, boost gauge and water temp gauge in the standard dash positions, the gauges in the Raptor dash are oil temp, oil pressure and volts.
 
DreXeL said:
Got a Raptor Dash from the missus for my birthday, lovely bit of kit.

Before:

Dash1_zpsd4627298.jpg


After:

Dash3_zps39adf15a.jpg


Dash2_zpsb747a16e.jpg


Still need to tidy up some wiring, and it has highlighted how the rest of my dash has seen better days, but I'm really happy with it :)
Click to expand...

i do like the stainless steel looking toggle and push switches you have there . may i ask where you got them from, as i will be building up my raptor dash soon..
 
How did you manage to drill the push switches on the ****?
Hang your head in shame:D
 
I didn't, they are the standard lighter socket sized holes, it's just that the switches are slightly too small so they can move around slightly in the holes. I have since straightened them out ;)
 
I did actually think that after posting, but thought a bit of **** stirring first thing in the morning will set the day off a treat!
Maybe remove the switches and fit an o ring around the body, this should hold it central in the slightly oversize hole.
 
take nut off, bit of silicon in the space, nut on, level up, when silicone sets roberts yer fathers brother, silicon allows for if the hols are not 100% alaigned, an O ring wont :)
 
Silicone is messy ****, o ring leaves your pinkies spotless
Right size o ring will allow 100 percent alignment
 
jeff. said:
looks good , where can you buy the raptor dash from?

thanks
Click to expand...

Err.... Here: Raptor Engineering

I'm looking at a dash console, but can't decide between the Raptor or Mud Stuff version -even the Bolt-On RDX ones look good, but I suspect they are built down to the price.

Choices Choices...
 
Last edited:
nice looking bit of kit and is something i will be doing in the future but I`m too tight to spend that sort of money so will look at making something simular ;)
 
Heyyyyy. If we're doing Raptor console photos again here's mine! :D
Dark and understated, blends in very well.

Looked long & hard at the other options but at the end of the day you can't get away from the versatility, quality & price of the Raptor offering.

 
You must log in or register to reply here.

Similar threads

meego
Raptor Dash
Replies
9
Views
1K
dag019
dag019
styleruk
Dash repair
Replies
6
Views
515
Dippypud
Dippypud
B
Might have installed the wrong slave cylinder
Replies
5
Views
514
Hicap phill
H
1
Defender 90 TD5 rear wash wiring loom from dash switch to pump?
Replies
12
Views
2K
dag019
dag019
K
What money should I be asking?
2
Replies
27
Views
6K
Karls
K
Back
Top