Inner Wing Replacement

Guygettinby · Feb 2, 2012

Hello All,

The time is coming near to replaced the driver side inner wing of my Disco. I will not be doing the welding but I would like to do as much of the prep work as I can. To me it looks really awkward to get at especially at the top under the power steering. Anyone any tips or experience on this?

The passenger side has three golf ball size holes in it which I assume is ok to patch?

Thank You

dyte · Feb 3, 2012

Guygettinby said:
Hello All,

The time is coming near to replaced the driver side inner wing of my Disco. I will not be doing the welding but I would like to do as much of the prep work as I can. To me it looks really awkward to get at especially at the top under the power steering. Anyone any tips or experience on this?

The passenger side has three golf ball size holes in it which I assume is ok to patch?

Thank You

Your power steering is not on the wing ?

Guygettinby · Feb 6, 2012

Sorry not power steering. I mean just under where the break fluid reservoir is..

loncbt · Feb 6, 2012

Check out these guys on ebay... they do loads of replacement parts..

LAND ROVER DISCOVERY BODY SHELL REPAIR PANELS | eBay

johnny curt 1 · Feb 7, 2012

if its the full wing your replaceing do yourself and your landy a big favour

strip all the carpets and the rubber watersponge **** out of the front and chip the thick crusty mat stuff off the footwell behind the pedals as this stuff is mental for catching fire and a total bastard to put out also remove the kick pannel on the drivers side footwell and lift the wires and relays up out of the way ( these are a nightmare to splice back together after theyve been singed or burned

this bit of prepwork normally gets leaft to the welder wich i hate doing this job as its time consumeing and awkward ( trus me whoever does your welding will thank you for it ) i know i would

GreenHornet · Feb 7, 2012

^^^^^ WHAT HE SAID. PREP WORK IS THE KEY.

Its not a hard job to do just need time and patients

John FHA · Feb 7, 2012

pics as you go please. It's all about learning

trax99 · Feb 7, 2012

I did mine a couple of years ago, it's actually not as difficult as you might think, there are pics on here somewhere.
as for replacements - repair panels and body mounts for all Landrovers, including Range Rover Classic, Defender, Series, Discovery

Guygettinby · Feb 7, 2012

Thanks very much for your comments. I will post pictures as the job progresses..

Inner Wing Replacement

Guygettinby

New Member

dyte

New Member

Guygettinby

New Member

loncbt

New Member

johnny curt 1

Well-Known Member

GreenHornet

Well-Known Member

John FHA

Active Member

trax99

Well-Known Member

Guygettinby

New Member

Similar threads