injectors

gee1599 · Dec 14, 2009

hi i need a set of injectors or need to get mine reconed can any one tell me where to go i dont have that much money ie to bye a new set at apx £500

CharlesY · Dec 14, 2009

gee1599 said:
hi i need a set of injectors or need to get mine reconed can any one tell me where to go i dont have that much money ie to bye a new set at apx £500

What engine are they from? Exact engine type please.

I can clean and reset injectors here, but you would need to post them up.

What is supposed to be wrong with them ?

CharlesY

gee1599 · Dec 18, 2009

i have a 92 defender 90 with the defender engine ive been told they are leaking and or the springs have broken / week they need to be done as the engine has diesel knock at the mo bosch Part Number 0432 193 879 Number on Injector KBEL98P52 O.E. Part Number ETC 8412

CharlesY · Dec 18, 2009

gee1599 said:
i have a 92 defender 90 with the defender engine ive been told they are leaking and or the springs have broken / week they need to be done as the engine has diesel knock at the mo bosch Part Number 0432 193 879 Number on Injector KBEL98P52 O.E. Part Number ETC 8412

If you can do without them, post them to me and I can open them up.
If no springs are broken, they can be re-set easily enough.

There must be SOMEONE down your way with a Hartridge Pop Tester.

There is no magic to injectors. They are simple mechanical devices, easily stripped and cleaned, but to re-set them you must have the Pop Tester or a similar device.

CharlesY

Dent · Dec 18, 2009

CharlesY said:
If you can do without them, post them to me and I can open them up.
If no springs are broken, they can be re-set easily enough.

There must be SOMEONE down your way with a Hartridge Pop Tester.

There is no magic to injectors. They are simple mechanical devices, easily stripped and cleaned, but to re-set them you must have the Pop Tester or a similar device.

CharlesY

What pressure range do these testers need ?, might have a go at making one .

CharlesY · Dec 18, 2009

Dent said:
What pressure range do these testers need ?, might have a go at making one .

You will need a hand pump and a gauge that can reach at least 200 BAR / 3,000 psi.

It isn't worth trying to make one. See if you can locate one on Google or some local garage.

'Hartridge Pop Tester' is the one I have.

CharlesY

injectors

gee1599

New Member

CharlesY

Well-Known Member

gee1599

New Member

CharlesY

Well-Known Member

Dent

New Member

CharlesY

Well-Known Member

Similar threads