Indicators work on one side only

I have tried searching but can't find the answer

My n/s indicator is not working on the stalk or the hazard switch I have checked the earths and they look ok I have tried to check voltages with a meter but I'm not quite sure how it works

How should I be testing the circuits?

I'm suspecting the hazard switch, what do you think?

Oh and when I put the n/s indicator on the relay makes a strange buzzing noise but not when putting the o/s on or the hazards

Remove the relay and give it a sharp tap then replace it
Worked for me

Daz

Thanks but I already tried that one

Fitted a new relay and now it flashes fast on n/s and not buzzing but it ticks all the time?

might help Hazard Switch & Indicators - fault diagnosis - Defender Forum - LR4x4 - The Land Rover Forum

trax said:

might help Hazard Switch & Indicators - fault diagnosis - Defender Forum - LR4x4 - The Land Rover Forum

Click to expand...

That's great thanks for that

Just turn right

chunkymunky said:

Just turn right

Click to expand...

I was but it gets boring after a while

😉

Finally sorted it, turned out it was the front and the rear bulb holders and the relay I fitted was faulty, cleaned the bulb holders and put old relay in and it's all ok now