Indicator switch! Brown wire???

Aidso said:

you should have power on the green 49+

that should be fed from fuse connection 6

Click to expand...

If can buy you a pint I will. Thanks thanks and thanks again!:rofl:

I traced the green wire from flasher unit back through the loom and it was connected to the voltage stabiliser, which is why that was working until you turned on the indicators.

One of my stupid errors in sorting out burnt spaghetti wire loom......

But it's seems all sorted now. Will get another volt stabiliser ASAP and fit that.

Thanks all for your help especially Aidso for sticking with me over the last few hours and guiding by remote control.

Tam9433 said:

If can buy you a pint I will. Thanks thanks and thanks again!:rofl:

I traced the green wire from flasher unit back through the loom and it was connected to the voltage stabiliser, which is why that was working until you turned on the indicators.

One of my stupid errors in sorting out burnt spaghetti wire loom......

But it's seems all sorted now. Will get another volt stabiliser ASAP and fit that.

Thanks all for your help especially Aidso for sticking with me over the last few hours and guiding by remote control.

Click to expand...

thats what we are here for.