Tony pepperell
New Member
- Posts
- 6
- Location
- Brixham
Help trying to find out where imv valve is on a freelander 1 td4
Imv
- Thread starter Tony pepperell
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152
Well-Known Member
- Posts
- 9,419
- Location
- South London/North Kent
Very close to the left hand banana flange, near the spigot bend.
Tony pepperell
New Member
- Posts
- 6
- Location
- Brixham
Lol no help sorry but thank you
This is driving me mad
This is driving me mad
td4van
Well-Known Member
- Posts
- 1,566
- Location
- Gloucestershire
What’s an imv valve?
Tony pepperell
New Member
- Posts
- 6
- Location
- Brixham
Injection metering valve
bankz5152
Well-Known Member
- Posts
- 9,419
- Location
- South London/North Kent
Try checking if the injectors are at the correct *****
May wanna check where ya posted dude, this is anything goes a land of nonsense
May wanna check where ya posted dude, this is anything goes a land of nonsense
blue beasty
Leaks an prone to bits dropping off
- Posts
- 65,014
- Location
- Gloucestercotshirewolds
Try checking if the injectors are at the correct *****
May wanna check where ya posted dude, this is anything goes a land of nonsense
It's bin moved ya Muppet
Tony pepperell
New Member
- Posts
- 6
- Location
- Brixham
Cheers
bankz5152
Well-Known Member
- Posts
- 9,419
- Location
- South London/North Kent
It's bin moved ya Muppet
Ffs twice in one evening!!
I think i need specsavers
And really q uimm is blocked? Hahahaha
blue beasty
Leaks an prone to bits dropping off
- Posts
- 65,014
- Location
- Gloucestercotshirewolds
Ffs twice in one evening!!
I think i need specsavers
And really q uimm is blocked? Hahahaha
In here, in this context.....yes.
I had to look up IMV so I'm obviously no help
Someone will know I'm sure.
Tony pepperell
New Member
- Posts
- 6
- Location
- Brixham
Cheers
- Posts
- 83,310
- Location
- Embasinga stocæ
dont forget to say "please"
bankz5152
Well-Known Member
- Posts
- 9,419
- Location
- South London/North Kent
In here, in this context.....yes.
I had to look up IMV so I'm obviously no help
Someone will know I'm sure.
Better censors than the FCC hahaha
- Posts
- 83,310
- Location
- Embasinga stocæ
on the back of the main injector pump on the engine.
typical faults are engine shuts down under load hence making it drop speed and struggle to get 50mph. ease off and it clears and picks up again.
see https://www.landyzone.co.uk/land-rover/td4-lack-of-power-at-70mph-fixed.77147/page-6
typical faults are engine shuts down under load hence making it drop speed and struggle to get 50mph. ease off and it clears and picks up again.
see https://www.landyzone.co.uk/land-rover/td4-lack-of-power-at-70mph-fixed.77147/page-6
Tony pepperell
New Member
- Posts
- 6
- Location
- Brixham
Thank you
guineafowl21
Well-Known Member
- Posts
- 3,364
- Location
- Inverness
Is this the high pressure fuel regulator? On the back of the HP pump, two Torx bolts and a two-pin plug. O-rings can degrade inside it.
Similar threads
