adam300tdi
Active Member
- Posts
- 639
has any body done this.just bought some subaru seats cheap and wondered if any body had alredy done it and how difficult it was to get them to fit
impreza seats in disco
- Thread starter adam300tdi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
cant see it being too hard tbh just use disco mounts
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
I bolted a sheet of 6mm chequer plate onto the Disco runners and then bolted my Recaros to the plate.
adam300tdi
Active Member
- Posts
- 639
ive seen that before looks realy smart.but the only reason i asked is because im sure ive some 1 on here has impreza seats in using the impreza runners aswell
Jay reKx
Active Member
- Posts
- 784
- Location
- tenbury wells
the floors (relatively) flat, can you not just bolt the scooby runners through the floor? you may need to raise them a bit though. it'd be easer and less hassle using the disco runners.
Got me thinking about my seats, so made a quick search and found anything is possible....
full listing...
Power Chair with Recaro Seat - Electric Wheelchair | eBay
full listing...
Power Chair with Recaro Seat - Electric Wheelchair | eBay
Matt Baxter
Active Member
- Posts
- 551
- Location
- Fleet,welding up a disco
I bolted a sheet of 6mm chequer plate onto the Disco runners and then bolted my Recaros to the plate.
Them seats are in far to nice of a condition for a disco! they'd look better in my cossy!
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
look even better in my fender lol
Matt Baxter
Active Member
- Posts
- 551
- Location
- Fleet,welding up a disco
Yeah I knowThat's were they started life - not going back anytime soon.
Yours look very clean matey well better than mine, but at least mine are in the right car!!
Bugger off!
godzilla84
Active Member
- Posts
- 192
- Location
- Liverpool, Merseyside
Is that a sapphire cossie?
Co-Pang-Yang
Well-Known Member
- Posts
- 2,930
- Location
- Colchester, Essex
Fitted them in my 300tdi, I'm struggling to remember how we did it but I believe we cut the subframes in half and welded the top of the Impreza frame to the bottom of the Disco one.
Sorry I can't be more helpful
Chris
Sorry I can't be more helpful
Chris
Matt Baxter
Active Member
- Posts
- 551
- Location
- Fleet,welding up a disco
yes mate
