I'm certain there's a part missing here - what should it look like?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
In the diagram, it is esr283 and esr282.

Because you have LH and RH parts.

You may find lrdirect are cheaper..

Also you will need the rubber bungs for these brackets.

Cheers
 
Is there one on a 300 ??? I've never ran one !!

Well my 300tdi fender has the blanking plates, as I did not remove it, I would assume it did have one.

The D1 300tdi has them I know because I took one off. Microcat does show an EGR on the 300tdi defender. Oh and it only has one belt on the front unlike the 200tdi.

Cheers
 
Back
Top