- Posts
- 10,746
- Location
- A bit sarf of Dorking
Okay, silly me didn't make a note of connections when removing the switch. Ho hum. Currently downloading the Rave CD manual, because Haines appears to be wrong. 1989 One Ten.
I have:-
Pin 1 White/Black
Pin 2 Brown/Red
Pin 3 White/Orange
Pin 4 White/Red
Pin 5 Red
But, whilst this seems to be correct, giving correct panel lights for oil pressure and battery, the fuel stop doesn't operate.
I have a large diameter white wire spare - which is, I suspect, the one for the fuel stop. And as you can see, I have nowhere to put it.
Haines says two white wires should be connected, but since they have different functions, it seems unlikely that they would both be white. In any case, I only have one white wire. The white/black is not on the diagram at all, but it's this that operates the power to the oil/batt lights on the panel.
Anyone care to comment? Not on my stupidity though, I've already told myself off.
I have:-
Pin 1 White/Black
Pin 2 Brown/Red
Pin 3 White/Orange
Pin 4 White/Red
Pin 5 Red
But, whilst this seems to be correct, giving correct panel lights for oil pressure and battery, the fuel stop doesn't operate.
I have a large diameter white wire spare - which is, I suspect, the one for the fuel stop. And as you can see, I have nowhere to put it.
Haines says two white wires should be connected, but since they have different functions, it seems unlikely that they would both be white. In any case, I only have one white wire. The white/black is not on the diagram at all, but it's this that operates the power to the oil/batt lights on the panel.
Anyone care to comment? Not on my stupidity though, I've already told myself off.
