Disc300Series
Active Member
- Posts
- 313
- Location
- NorthEast
Does anyone have pictures of how the wiring harness is clipped to the bulkhead before the dash is installed they could share please ?
I need help on wiring layout inside bulkhead
- Thread starter Disc300Series
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
AlbertDefender90
Active Member
- Posts
- 955
- Location
- Ellesmere, Shropshire
Disc300Series
Active Member
- Posts
- 313
- Location
- NorthEast
Good point, I should have said. It's 200tdi.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
When I swapped mine over the loom just hung in place. i.e through the hole in the middle of the bulkhead to engine bay side, over steering column etc.
Whether that's right or not I don't know. But once the dash is in it can't really go anywhere. Would be better with something on though.
Proved their was from factory.
[/URL][/IMG]
Whether that's right or not I don't know. But once the dash is in it can't really go anywhere. Would be better with something on though.
Proved their was from factory.
- Posts
- 11,032
- Location
- North of the Wall
300tdi
