I have axcess to a CNC. Anyone interested in...

I am thinking of making a few things alloy wheel nuts, spacers, and wheel adapters. Anyone interested in any of these or other ideas. The main cost is the CAD design so if we get a group together I can have them made pretty cheap.

Let me know if you are interested or have any ideas.

Ty

Definitely interested in some wheel spacers if you get this sorted.

30mm or larger

30, though if you get interest for larger and it's cheaper to make them all the same I'll go with that.

Cheers

I'd be interested in the same 30mm. How much are you thinking?

*Edit
I also have a friend with a SIII. Would the same fit?

Could you make a one-off Hawse fairlead, and how much would it be? It is to fit a Fairey Pto.

Standard size:
- length: 295mm
- height: 67mm
- thickness: 18mm
- distance between bolt holes: 252mm
- bolt hole size: 12mm
- hawse opening/slot (where the synthetic ropes goes through): 184mm x 25mm rounded ends

The Hawse I need:
- length: 490mm
- height: 90mm
- thickness: 30mm
- distance between bolt holes: 367mm (measured at center of bolt hole)
- bolt hole size: 12mm
- hawse opening/slot (where the synthetic ropes goes through): (a) distance from center of left side bolt hole to left side rounded end -: 50mm (b) distance from center of right side bolt hole to right side rounded end -: 30mm (c) actual opening/slot -: 287mm x 25mm

Cheers!!