How tall is a 200tdi engine?

IamRobbie

Well-Known Member

Posts

2,800

Location

Derbyshire, j28 M1

• Jul 21, 2016

• #1

Any idea? I need to pull the engine out my truck but the wings and bar between wings are welded in and I'd like to be able to leave them in and lift the engine over. My bar sits 1300mm high from the floor so I need to know roughly how tall the block is to work out how big of a crane I need to buy

 

Foxyred

Well-Known Member

Posts

828

Location

J25 M1

• Jul 21, 2016

• #2

I have a spare in storage if I get chance tomorrow ill measure it

 

IamRobbie

Well-Known Member

Posts

2,800

Location

Derbyshire, j28 M1

• Jul 22, 2016

• #3

Foxyred said:

I have a spare in storage if I get chance tomorrow ill measure it

Click to expand...

Appreciate it thanks

 

Vinlander

Well-Known Member

Posts

695

Location

Kent

• Jul 22, 2016

• #4

28in to top of rocker cover. Shave maybe 4in off if you pull the sump, but don't rely on that, since there's bits wot stick out.

 

Vinlander

Well-Known Member

Posts

695

Location

Kent

• Jul 22, 2016

• #5

Identical to a 300 except for a couple of ancillaries not present on 200.

 

Foxyred

Well-Known Member

Posts

828

Location

J25 M1

• Jul 23, 2016

• #6

200tdi heights
Sump 5"
Block 21"
Top of cylinder head 25,5"
Top of rocker cover 27"
Full Height inc turbo 30"
All measurements include items below them (eg sump/ and block =21")
Length without fan to clutch 30"

Hope it is what your looking for

 

IamRobbie

Well-Known Member

Posts

2,800

Location

Derbyshire, j28 M1

• Jul 23, 2016

• #7

27" for my disco lump as turbo sits lower. That's perfect I appreciate it!
685mm so I could order a lift that claims to lift 2m however I'll go for one that claims to lift 2.4m and I should clear the bar. Other than that I'll just strip the head off the block and lift it from lower down.

Thanks again

Foxyred said:

200tdi heights
Sump 5"
Block 21"
Top of cylinder head 25,5"
Top of rocker cover 27"
Full Height inc turbo 30"
All measurements include items below them (eg sump/ and block =21")
Length without fan to clutch 30"

Hope it is what your looking for

Click to expand...

 

sp00k

Well-Known Member

Posts

1,530

Location

Washington, County Durham, UK

• Jul 24, 2016

• #8

Robbie, you could maybe also lower the vehicle. Take the wheels off and have the chassis sitting on blocks of wood. You could also strap down the front suspension to help as it rises up quite a bit with the engine out.