- Posts
- 8,543
- Location
- Tamworth, staffs.
If your props have been binding(reference your other thread) surely that will ware the bearing in the diff down quicker?
How does this happen? Rear diff broke!
- Thread starter warrior
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yup, I had removed the wide angle prop the one the on now is a Standard one
- Posts
- 8,543
- Location
- Tamworth, staffs.
your lifted though right? 2"?
Wouldn't putting standard props back on make it worse? if it needed wide dangle beforehand.
gemsdad
NOT BOTHERED.
- Posts
- 67,829
- Location
- halfway between here and there.
I know. Fingers crossed it doesn't happen to mine though, ive got enough problems at the moment
just not able to put yer finger on it though.
Yeah bits temporary, whilst my wode angle one is sent back.
- Posts
- 8,543
- Location
- Tamworth, staffs.
don't know if it helps but there is a chap on Devon4x4 selling some wide angle props.
Heard you say your gonna get papa G's props but chap on devon is selling them for £150 each.
jai_landrover
Well-Known Member
- Posts
- 13,409
- Location
- Luton
Propshaft slider seized by any chance
They never just go. There will be noise for some time then lots of noise then bang 99% never just go
They never just go. There will be noise for some time then lots of noise then bang 99% never just go
jai_landrover
Well-Known Member
- Posts
- 13,409
- Location
- Luton
Ah page 2 binding props would do it. Aswell as the mucky watery oil and plenty of noise
Saw then when he 1st posted might be worth it.
Yup yup and only after it had gone when I drove the rest of the way home with the center diff locked
Similar threads
Freelander 2 (LR2)
Scrabbling after diff bearing change
Freelander 2 (LR2)
Rear Diff Rumble / Judder Just Started
