Hoses
- Thread starter Maxwell8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Got the Steel elbow refurbishing at moment it's what make hoses to use I'm interested in
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
You can now get silcone hoses made in matt black to like like period rubber hose. I think its a good solution as they seem to last well.
Do you know who makes the series silicone ones? Can only find defender.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
I doubt if there is much difference between the hoses for a Series 3 and the hoses for a 2.5 Petrol or NA Ninety. Or there are people who make them up if you supply the old ones. Local radiator place, fuel injection shop, or lots of stalls at the landrover shows all do it.
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
When I needed some special hoses I searched on e-bay, there are guys listing a lot of diameters / lengths and colours, elbows too.
Try Demon Tweeks:
https://www.demon-tweeks.com/uk/samco-air-water-silicone-coupling-hose-standard-colours-247850/
Try Demon Tweeks:
https://www.demon-tweeks.com/uk/samco-air-water-silicone-coupling-hose-standard-colours-247850/
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
1: none, 2 e-bay. I have an e-bay silcone hose on my engine air inlet as the rubber ones kept falling apart, its much better.
