giveitago
Member
- Posts
- 76
- Location
- somercotes
had to remove the plastic snorkel because of the roll cage so had a go at making one, here's a few pic's. I know the weld looks **** but it'll do the job
home made snorkel
- Thread starter giveitago
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
Good bit of welding there 
Though if you find yourself in deep enough water that the snorkel is needed, you'll get very wet feet from the water coming in through the air vents
Though if you find yourself in deep enough water that the snorkel is needed, you'll get very wet feet from the water coming in through the air vents 
v8geoff
Well-Known Member
- Posts
- 3,327
- Location
- chippenham,wiltshire
Good job like it
easye1
Banned
- Posts
- 8,557
yep, good job...
always keen to see others try to fabricate stuff that works..
always keen to see others try to fabricate stuff that works..
giveitago
Member
- Posts
- 76
- Location
- somercotes
Good bit of welding there
I get wet every time it rains mate but luckily the wind blowing throe the door seals soon dry's me out
