Holey Chassis Batman

Just had a quick Pre MOT poke with a screw driver round the RRC (D reg) and
have found a large hole.....

Rear drivers side wheel arch. There are 2(I only have 1!) brackets which
support the boot floor, these are fixed to the chassis rail. Well mine was,
in it's place is a large hole in the chassis rail!. So my questions are:

1. What are these brackets called, can't find my genuine manual at the mo
to see if they are listed.

2. Can they be bought as spares, if not it's off to the breakers tomorrow.

C. Any hints or tips welcome......only problem I can see is the closesness
of the fuel lines/fuel tank to the area which needs welding!.

Dom J

In message <[email protected]>
"Dom J" <[email protected]> wrote:

> Just had a quick Pre MOT poke with a screw driver round the RRC (D reg) and
> have found a large hole.....
>
> Rear drivers side wheel arch. There are 2(I only have 1!) brackets which
> support the boot floor, these are fixed to the chassis rail. Well mine was,
> in it's place is a large hole in the chassis rail!. So my questions are:
>
> 1. What are these brackets called, can't find my genuine manual at the mo
> to see if they are listed.
>
> 2. Can they be bought as spares, if not it's off to the breakers tomorrow.
>

For GA441004 on vehicles

MXC7154 - Front Floor Crossmember
MXC7155 - Rear Floor Crossmember

These fit at the front of the rear floor by the "step"

For pre GA vehicles...

390353 Crossmember to CA274120 - 2 Door
to CA273922 - 4 Door

then

MUC6306 Crossmember to GA441003

> C. Any hints or tips welcome......only problem I can see is the closesness
> of the fuel lines/fuel tank to the area which needs welding!.
>
> Dom J
>
>
>

Richard

--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems