Hi new member

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Derek v

New Member
Posts
4
Location
wolverhampton
Hi Guys im a new member to the Landyzone. Even though i have a few rovers 75's and some American motors. Two weeks ago i brought a freelander 1.8 petrol for the wife to run round in. Yes its had the upgrade head gasket done and the bill is with the motor along with the prop bearing and a few other bits and bobs from the looks of things.44k on the clock so should be good for a few more miles.
 
Hi Guys im a new member to the Landyzone. Even though i have a few rovers 75's and some American motors. Two weeks ago i brought a freelander 1.8 petrol for the wife to run round in. Yes its had the upgrade head gasket done and the bill is with the motor along with the prop bearing and a few other bits and bobs from the looks of things.44k on the clock so should be good for a few more miles.
Welcome! You've just joined the best Landy forum on the Internet!
 
Hi Guys im a new member to the Landyzone. Even though i have a few rovers 75's and some American motors. Two weeks ago i brought a freelander 1.8 petrol for the wife to run round in. Yes its had the upgrade head gasket done and the bill is with the motor along with the prop bearing and a few other bits and bobs from the looks of things.44k on the clock so should be good for a few more miles.
Welcome to the forum
I7pha4t.jpg
 
God is good all the time 1.8 freelander mixing water with oil. Head gasket replaced now timing the belt need help. I am from Zimbabwe.
Welcome to the forum
I7pha4t.jpg


This section is for introductions only. For technical help you should post your questions in the vehicle specific sections listed below, where owners of those vehicles will offer advice.

Main forum index:
www.landyzone.co.uk/forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9
 
Back
Top