hi guys newbie needs help
- Thread starter max1960
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Download rave and buy yourself the haynes manual.....your going to need them both sooner or later and the haynes will take you through how to do this.
Also your going to need a torque wrench that goes upto 300ftlbs for replacing the driveshaft nut.:welcome2:
Also your going to need a torque wrench that goes upto 300ftlbs for replacing the driveshaft nut.:welcome2:
2001ytd4
Banned
- Posts
- 218
- Location
- birmingham
Its 400ftlbs on a td4 ?
Cv joints are not to bad to change if you have decent mechanical skills. I bought a set off the net for around £20 each. Quality parts too. I will post he website when im near my pc.
Cv joints are not to bad to change if you have decent mechanical skills. I bought a set off the net for around £20 each. Quality parts too. I will post he website when im near my pc.
Last edited:
No its 295 lbf ft or 400nm
you can get the outer cv joints £20 ish no problem if it's an inner your looking at £170 ish for the cv or £350 for a new driveshaft as you can only get them from a main stealer for the later td4 ones but I don't know about the earlier ones
you can get the outer cv joints £20 ish no problem if it's an inner your looking at £170 ish for the cv or £350 for a new driveshaft as you can only get them from a main stealer for the later td4 ones but I don't know about the earlier ones
Last edited:
Similar threads
Freelander 2 (LR2)
Freelander 2 - XS trim?
