Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Ah, worth knowing! I'm only 5 mins away if you ever need a hand.
Dangerous words haha. I always need help!
Hertfordshire Lanes?????
- Thread starter 99claydond
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dangerous words haha. I always need help!
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Chaps out of interest does anyone have the ability to fit tyres? Oaktree are messing me around a bit and I need the motor tomorrow. Can't find anywhere locally that will do it reasonably. Naturally I will line your palms with silver/cake
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
I can fit but not ballance
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Perfect.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
What do you want done. Tubes and tyres?
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Yeah pretty much. I tried doing it myself. What a pain in the tits
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Sent location on WhatsApp
Defenderdog1
Active Member
- Posts
- 404
- Location
- Hemel Hempstead
Don't need to balance big tyres like that not worth it, I haven't got weights on mine and I've got no problem.
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Stu when is a good time?
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Defenderdog1
Active Member
- Posts
- 404
- Location
- Hemel Hempstead
If stu can't do them I will get them done up here.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Mine ain't balanced either
Defenderdog1
Active Member
- Posts
- 404
- Location
- Hemel Hempstead
Ha ha that's a monster truck !!!
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
The big beast above runs 14 psi. I would say 28 about right. Rears could be softer if you are not carrying weight. I put 30 psi in all of Lees. 7 tyres fitted for him and axel welded for his mot. Cheers for the pint by the way.
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
top job mate. thanks a lot. just need to go and drive it now!
KillaJoules
Active Member
- Posts
- 950
- Location
- West Herts
Careful Lee, hes got his eye on trialling them, maybe he wont want his knigpins back for the classic now ;-)
B3aker
Well-Known Member
- Posts
- 1,425
- Location
- Cambridgeshire.
Afternoon all, Long time no see!
Quick update as to where i have been other than work!
Had the dreaded HGF on my 110, all looked good once it was off and the head looked as though it had just shifted slightly, by the looks of the bent and sheared off dowels. Anywho, had it tested just incase....
Blasted cracked fuel gallery in injector 1, Damnd Td5!!!! So just taken delivery of an AMC head for it and all the bits to put it back together again, as well as some other bits whilst i have the engine in many many parts!!!
So, I shall hopefully be back up and running in a couple of weeks once i get an MOT and all that Jazz!!!
Hope you are all and shall have to attempt to make the pub meet next month.
Beaker
Quick update as to where i have been other than work!
Had the dreaded HGF on my 110, all looked good once it was off and the head looked as though it had just shifted slightly, by the looks of the bent and sheared off dowels. Anywho, had it tested just incase....
Blasted cracked fuel gallery in injector 1, Damnd Td5!!!! So just taken delivery of an AMC head for it and all the bits to put it back together again, as well as some other bits whilst i have the engine in many many parts!!!
So, I shall hopefully be back up and running in a couple of weeks once i get an MOT and all that Jazz!!!
Hope you are all and shall have to attempt to make the pub meet next month.
Beaker
