Freelander 1 Here comes...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

mbrokof

Active Member
Posts
710
Hello All,

had the car standing for more or less a year now. Drove it only a couple times for a while. Every time it stood for longer it drove very nice afterwards, gearing was very soft, good accelerating and so on. After the second or third ride, shortly after driving again, it became worse. Long time not driving and again it drives well, which happened now a couple of times. Anyone had something like that? Maybe the vacuum hoses or something like that?
KR
Matthias
 
Did you change oil? Filter? fuel / diesel pump? If car is diesel, maybe you will need to change it. Diesel is easy to get bad fast.
 
Did you change oil? Filter? fuel / diesel pump? If car is diesel, maybe you will need to change it. Diesel is easy to get bad fast.
Yes, it's a td4. Ok, will get that done, thanks. Had a look into that fault code reader Creader earlier also. As only some values come up I was wondering if they would be ok resp. in the range. 30/40/50/60 mph with values Fuel Rail Pressure relative to Manifold / Fuel Rail Pressure ~426 / ~79K kPA, 584.3kPA / ~108KkPA, ~672kPA / ~125K kPA and ~711 / 131880 kPA. According to what I found from Nodge that should be ok for FRP, but not sure what that one is ok.
 

Attachments

  • IMG_5685.jpg
    IMG_5685.jpg
    276.1 KB · Views: 46
  • IMG_5692.jpg
    IMG_5692.jpg
    304.9 KB · Views: 42
  • IMG_5693.jpg
    IMG_5693.jpg
    342.7 KB · Views: 44
  • IMG_5694.jpg
    IMG_5694.jpg
    345 KB · Views: 39
Back
Top