Help with turn signals

Putting my project back together. Having some electric issues with turn signals and hazard lights. Nothing is working, dont hear any clicking when turn switch or hazard flasher is activated.

- where is flasher relay located?

Any help greatly appreciated.

85 LR 110 with def 200tdi.


Regards
Mark

Ok, my little troll alarm is giving me funny looks, but in case you're genuine (noting your low post count), google 'defender electrical schemes' for the wiring diagram and 'defender electrical library' for a manual packed with photos of where to find everything.

Will give it a try. Am quite genuine. And really have non functioning indicators.

alot of flasher issues can be caused by the hazard switch, as IT controls the flow of power through the stalk, relay etc. google should bring you a step by step guide on checking it.

sod it, feeling kind.
here you go

If your hazards have stopped working, and indicators , 99% sure it is your hazard switch.£10.00 get a new one.

Take off the fuse box cover. Then remove the fuse box itself. You should then find the flasher relay. Simply swap with a new one. Job done.

Found the lr4x4 page with the step by step. Much thanks. Helps to know where to look.

I had a similar problem when I swapped out my bulkhead. turned out that the ignition was plugged in incorrectly.

I'd say hazard switch as well, try flicking it on and off vigerously a few times, sometimes wakes it up