help using one shot hub grease in series II wont all fit

hi a mate of mine has just filled, well half filled one hub on his landy but he cant get anymore in there it seems to be full , he drained all the old oil out undone the 4 bolts on the top took the cap off and filled all he could but its only used about half a sachet any ideas . . . . . . help

Sounds as if you have an airlock of somekind as the sachet should all go in a series swivel hub no probs

Spin the shaft, that should move the grease and hopefully the air lock.

Also worth putting the sachet of grease in hot water before you use it...makes the grease thinner.

erm,,"undone the four bolts on the top and took the cap off".thats not where the grease goes.there's a fill plug on the swivel side.

jonteewilly said:

erm,,"undone the four bolts on the top and took the cap off".thats not where the grease goes.there's a fill plug on the swivel side.

Click to expand...

i was sayin tha ta Si earlier :hysterically_laughi

yeah hes been squeezin it thro an 1/8" hole in the railko,its a wonder he never dropped a plum doin it!

jonteewilly said:

yeah hes been squeezin it thro an 1/8" hole in the railko,its a wonder he never dropped a plum doin it!

Click to expand...

good job nobody had done the penny trick on it cus he wudda bin fooked then

lol