Help taking out P38 door handles please!

B

babyvoguev8

New Member

Posts

18

• May 4, 2010

• #1

Hi! I'm looking at wrapping my P38 white and would like advice on taking out door handles.
I can see the obvious screws but advice welcome to any problems I mar come accross.

Thanks in advance

Matt

 

H

Henrik97

Active Member

Posts

301

• May 5, 2010

• #2

Inside or outside?

 

B

babyvoguev8

New Member

Posts

18

• May 6, 2010

• #3

The outside ones

 

Derek Ward

Active Member

Posts

798

Location

Happily Ex Blackburn, Now Blairmore, Argyll & Bute

• May 7, 2010

• #4

Be VERY careful when disconnecting the actuating rods - one in particular being the key lock. This is on a cast (aluminium??) arm that cracks and breaks very easily if too much force is applied getting the rod out. A new door handle will be required if you break this.
The handle is hooked into the forward end and only screwed at the rear.
Again, be very careful with releasing those rods!

 

denzilpc

New Member

Posts

26

Location

peterborough

• May 7, 2010

• #5

hi mate how much is going to cost to get your p38 wrapped?

 

B

babyvoguev8

New Member

Posts

18

• May 7, 2010

• #6

Thanks Derek

On a day to day basis I remove the handles on various vehicles but mainly vans, not RR's so your help has helped alot. Leave them in!

Denzil, I do it for a living so the cost of the vinyl plus my time.

Thanks to all who took the time to answer!

Matt