help please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

si-freelander

New Member
Posts
24
hi all a bit of help please pics if poss I want too clean the inlet manifold ?? (sorry not a mahanic stone mason ) so how would I go about this was hoping I could do today but need advice

thanks
 
Diesel you will need a new manifold gasket. Take off neg battery terminal 300 tdi take out the bolt securing the dip stick tube to engine and remove, remover clip holding inlet hose, and you may also need to unbolt the EGr pipe which connects to inlet manifold also gaskets, then remove upper and lower bolts holding manifold and take off manifold
200 tdi pretty much same thing
 
Not sure whether your enquiry is regarding how to clean it or how to take it off, but if it's the former, I had mine acid dipped with a load of other bits the other week and it came up like new.
 
pics would really help

The result of an acid dipped air intake manifold:

953755AA-F727-4CEE-A639-413AE6EF3173-6154-000004A608D4895C_zps97d1d8aa.jpg
 
Don't know if this is any good to you? You'll need to remove the exhaust manifold too, because there is one gasket that does both manifolds.

ImageUploadedByTapatalk1366550782.055795.jpg
 
thanks for help guys will have to put up with sluggish till next weekend get the gasket will start soaking bolts in wd40 me thinks

cheers
 
Back
Top