Sutek
Member
- Posts
- 12
- Location
- Brisbane, Australia
Hi guys,
I have a 300TDi 1999 and it has recently developed some starting, running and stalling problems. It is very difficult to start now, whereas before it started first kick every time. It has a total lack of power, I mean there's nothing there with the accelerator pushed to the floor, then it just kicks back in. When stopped at lights and such it shakes and nearly stalls. I replaced the injectors a while back when it first started and did have a problem with the overflow return pipes leaking (not sure of the names but the little bolts screwed into the injectors with pipes attached). I tightened them properly and replaced the copper washers and fitted new hoses, which stopped the leaking fuel but the running problems remain, does anyone have any advice? I thought it might be the injector pump, which will be expensive I gather, so would like to explore other possible options first
Cheers
I have a 300TDi 1999 and it has recently developed some starting, running and stalling problems. It is very difficult to start now, whereas before it started first kick every time. It has a total lack of power, I mean there's nothing there with the accelerator pushed to the floor, then it just kicks back in. When stopped at lights and such it shakes and nearly stalls. I replaced the injectors a while back when it first started and did have a problem with the overflow return pipes leaking (not sure of the names but the little bolts screwed into the injectors with pipes attached). I tightened them properly and replaced the copper washers and fitted new hoses, which stopped the leaking fuel but the running problems remain, does anyone have any advice? I thought it might be the injector pump, which will be expensive I gather, so would like to explore other possible options first
Cheers