Help issuies after changing the Clutch

Hi All

I have just completed a clutch change on my 300TDi and have some issuies now, they are:

1.no speedo and rev counter
2. keep blowing the 10amp fuse for the dash lights (glow plugs battery etc)
3. The hand brake will no longer ratchet the button dose not return.

I have replaced one of the connectors on the diff lock sensor that had come off dont know if this could have anything to do with issuie 2?

Thanks

Rob

have you put speedo plug back on ,wire off alternator ,hand brake lever rod from pawl to button can get a little bent when lever pulled vertical to remove consol,check difflock switch and reverse switch have right wires to them there are extra that arent normally used (trans temp )

How many wires should there be on the diff switch I saw it had 2 terminals and there was a wire loose by it, the diff light on the dash didn't work before so I assumed that the loose cable had come off, it did work before the fuse blew