help a gun in my engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gregdiscovery

New Member
Posts
58
help, got a prob with my 300 disco, coming home tonight lost power and started banging. have took off the top intercooler to engine air plenum and its firing through the plenum. has any ever had this before and if so what was up?
please help.
many many thanks
 
help, got a prob with my 300 disco, coming home tonight lost power and started banging. have took off the top intercooler to engine air plenum and its firing through the plenum. has any ever had this before and if so what was up?
please help.
many many thanks

Sounds like you cam belt has jumped!
 
hi, turned out that one of the adjusters on the tappets had snapped and wasn't openting the exhaust valve.


WOW!!!

So all the half-burned fuel from that cylinder was going back into the inlet manifold and getting taken in by the other three cylinders!

And it was RUNNING!!!

Did you find the broken-off bits?

CharlesY
 
WOW!!!

So all the half-burned fuel from that cylinder was going back into the inlet manifold and getting taken in by the other three cylinders!

And it was RUNNING!!!

Did you find the broken-off bits?

CharlesY


yeah found em with the help of a magnet. found some bent push rods so dont know how they got bent prob before i bought it, so have ordered a new hopefuly straight set.
 
yeah found em with the help of a magnet. found some bent push rods so dont know how they got bent prob before i bought it, so have ordered a new hopefuly straight set.

Good plan.

Remember to re-check the clearances a few times, after about 500 miles than another couple of thousand. Sometimes new pushords can "bed in" quite a bit in no time, which makes MORE clearance and ticketty tappets.

CharlesY.
 
Back
Top