Hello from British Columbia, Canada 2001 P38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Soir

Member
Posts
12
Location
British Columbia, Canada
Hello all!

I am starting my work on my 2001 P38 4.6 HSE. I figured I would join your forum as you all seem to be quite helpful and knowledgeable on here.

The current issue I am attempting to tackle and will take to the forums for is to correct my SRS and Aribag Fault.

The current issue: My Nanocom will communicate with all systems except the Airbag SPS2 therefor I am unable to diagnose the fault with the airbag at this time. I will need to fix the ODB port/ECU communication error to get rolling. Your advice will be welcome. Thanks you in advance.
 
There's a couple of 'boxes' under the RHS kick panel, at least on the RHD car, one is cruise related, the other is SRS related, give it a wiggle
 
IMG_20220410_100323~2.jpg
IMG_20220413_160232_1~2.jpg
IMG_20220416_190703_1~2.jpg
 
Welcome to the forum
I7pha4t.jpg


Did ter get it resolved?
Unfortunately no, I have not yet figured it out. I have done over all the yellow connectors except the ones in the dash. I reviewed the shop manual and it expressly warns against using a micrometer on the SRS equipment to test. I will check the few connectors under the dash and then I suppose I am left going to the dealer? She will not pass inspection with an airbag fault. If only my Nanocom would communicate with the SRS ECU I would have a clue but I am lost.
 
Back
Top